Are you new to skateboarding and want to be a skating beginner? Do you want to learn how to ride an electric skateboard and how to use a skateboard? Then this article is exactly for you. It describes the skateboard tutorials as well as skating tips for beginners which may guide you to start skateboarding.
There are a few steps you should remember to ride an electric skateboard. First, you should be aware of the right standing technique (which foot is right to have in front or back).
Secondly, again how much distance you should have to maintain while standing on the deck. Third, you should know how to hold a skateboard, like how you can increase or decrease the speed through your handheld remote control. You should practice how to stop your skateboard.
If you have gotten the command over these aspects, then you must go to learn skateboard turning. The only thing you have to do for a few days without any gape is to practice these fundamentals. There are a few more steps like, ride a skateboard in traffic, ride a skateboard on the street, additional braking tricks, as well as basement quality.
These are a few skateboarding tips or steps that you should learn as a beginner skateboarder. Once you learn the basic steps of skateboarding then you are ready to take the joyful, thrilling experience of skateboarding.
Select your right front and back foot
The first and most critical move should be to understand what foot is best for you to put to the front or to stop it. There are two different types of skateboarding: one goofy skateboarder and one normal skateboarder.
Goofy Skateboarding: This is the kind of thing riders are likely to do when they remain left behind.
Regular Skateboarding: In standard skateboarding, the riders prefer the left leg to the front and back.
So are we describing these two approaches, but probably here you have a question as to what foot we should stand or rear? You will learn how to assess what foot you must put forward. Don’t worry, afterward. So continue to learn.
Ball Test: You must kick a football in this direction. The foot should hold that foot up and take the other foot forward. The foot should kick right and forcefully.
Slide Test: Slide on to slippery floors and put the socks on your feet. You have to keep the front foot on the skateboard, the best way to roll.
Board Test: In this test, the right foot and the right front foot have to be known on a skateboard for riding a skateboard. You can hold the hand of your friend to maintain your balance on the deck and begin the ride on the board. Test all approaches to find out what’s better or best for you.
This approach is often recommended for judging the right method of skateboarding.
You should continue both of them if you are more or less happy with both approaches. Both approaches are used by skateboarders.
If you already know how to ride an electric skateboard, here’s the list of best electric skateboards for 2021.
How to Stance on Electric Skateboard
Now it’s time to learn how to better stand on the deck after choosing your front or back foot. How far should your feet be from each other? Do you have to bend your knees, or do you not? Here we will clarify the different types of positions. But note that your entire balance/weight shouldn’t be carried back to your foot, otherwise you can lose your balance and an incident may occur.
Various types of stances
To learn more about riding an electric skateboard you must learn how to stand on an electric skateboard first. You will then read the different types of positions.
The snowboarding position is considered to be the most accurate and easy to use position. Like your shoulder width, you have to keep your foot’s gap a little longer. This position is best suited for wide turns. You should have 10 degrees to the front foot in this position, while you have 0 degrees to the back foot.
In this position, you have to maintain your back foot in the center of your deck, and both feet have 15 degrees angled. This position is best suited for turns and curving tricks.
You must stick to this place to make full fun when you want to ride a skateboard at 18-20mph. In this position, you must place the back foot in a perpendicular direction at the end of your board. You will then lean slightly forward to raise your back foot’s heel.
You should keep your back knee close to your front knee to keep balance and tie your body in unison. The advantage of this mentality is that you can balance when driving fast electric skates. This also contributes to the reduction of wind friction.
Ready to Push the throttle
A remote control is available for electric skateboards. Therefore, any feature you find on a remote control must be kept well aware of. It is only possible to utilize good practice, so continue to practice skateboards to get a better understanding.
You should be ready before you open the throttle because electric skates can have huge acceleration, but if you are not prepared for it, it can be risky. To maintain skateboard safety you should have skateboard training.
Lean your body and bend your knees to decrease the center of gravity, shift your weight to your foreleg. You should bend your front leg more than your rear leg. Your back leg should be stronger and more comfortable.
Make sure you don’t have your back foot at the end of the board, this will slip your skateboard. After initial acceleration, your weight will shift toward the longboard and you will feel more relaxed.
Likewise, you must take a particular brake position. This procedure reverses the above procedure slightly. The rider should bend his knees and turn to a small pick place. Move weight to the front foot and reverse slightly. So the center of gravity can be reduced.
This is how you can ensure that your front leg muscles are tightened, relaxed, and ready for comfortable braking after all of this. Again, you send the electronic speed controller signals to split/stop the board through your remote controller.
In case of an emergency, you should know of other braking methods. There are some. In cases of regenerative brake failure or other technical problems, you should be familiar with these manual braking techniques to stop or slow down your skateboards.
This is a conventional manual/kickboard braking system. Electric skateboards usually have their own regenerative, automatic braking system, so there’s little work to be done. But you can’t smash the skateboard any time because your remote battery is less charging or some other technological issue.
Therefore, in this emergency, you should have the abilities and the experience to quit skating.
How to break afoot: you need to position your foot in the e-skateboard direction. Bring your foot back to the surface of the road step by step. First, when you drive your feet too hard to the surface you must be conscious. Start with slow touch and if your skateboard speed slightly decreases and you believe you have enough friction. Press your foot to maximize friction to avoid the skateboard.
It’s the last thing you can do unless a renewable and foot brake works. You should thus sauté from the longboard and walk along the road and regularly slow down. Until it collapses, take care to catch your skateboard.
Now you have learnt how to make use of it, it’s time to buy your favorite one.
If you want a smaller size skateboard, here the guide for best mini electric skateboards.
Looking for high end electric skateboard, we have got you covered. check them out best electric skateboards under $1000.
Want a faster one, read our fastest electric skateboards guide.
We hope you can become a pro skateboarder by taking these skateboarding skills and learning how to skate. You just have to recall the four most important steps to allow you to quickly drive an electric skateboard, figure out which foot is good as your front or back leg, stand correctly on the ground, maintain balance when riding, avoid skateboarding from a distance or when you have to go manually. That’s it, have fun playing skateboard.